 |
| Quantity: | |
|---|---|
QT-02-L/G
QOTO
LoRa Automatic Solar Smart Drip Irrigation System
As much as 50% of this water is wasted due to overwatering caused by inefficiencies in traditional irrigation methods and systems. Smart irrigation technology is the answer.
QOTO IoT Smart irrigation systems tailor watering schedules and run times automatically to meet specific landscape needs. These controllers significantly improve outdoor water use efficiencies.
Unlike traditional irrigation controllers that operate on a preset programmed schedule and timers, smart irrigation controllers monitor weather, soil conditions, evaporation and plant water use to automatically adjust the watering schedule to actual conditions of the site.
The electric valve base remote irrigation system can be applied in residential, commercial, agricultural irrigation. Using 4G GSM remote control or Lora local internet makes irrigation a more science and intelligent program to save more water and labor.
product model | QT-02-L | |
battery | 18650 lithium battery(wide temperature)， battery capacity: 2000mAh，four pcs | |
solar panel | polysilicon 6V 5.5W | |
botton connector port | solar power charging port can support 5V 1A USB charger（6.5V/2A max） | |
flow meter | external flow meter | |
max speed：10m/s | ||
min speed：0.3m/s | ||
working pressure：5kg/cm^2 | ||
ball valve torque | 60 N.m | |
Max power | communication：3.8W | |
block：25W | ||
low power mode | sleep current：<10uA | |
non low power mode | stand-by current：NB<48mA,4G<65mA,lora<26mA | |
wireless communication specification | LoRa | 470Mhz-510Mhz |
| model | QT-LW-01 |
Product | LoRa gateway | |
Power supply | DC12V 1A or DC24V 1A | |
USB connector | USB hardware update and data printing connector | |
RS485 | VCC: Pull the switch to select the sensor power supply voltage: VIN or DC5V maximum 500mA | |
A：RS485communication port A (+) | ||
B：RS485communication port B (-) | ||
GND：ground wire for sensor | ||
Connected devices | ≤50 | |
Communication distance | ＜1km | |
Protection level | IP55 或 IP67(different protection shell) | |
Working temperature | -10~60℃ | |
Max power | 3.8W (the maximum power at the moment of full power transmission) | |
Real time communication consumption | <10mA | |
4G Communication | LTE Cat-1 | |
LTE-FDD: B1/B3/B5/B8 | ||
LTE-TDD: B34/38/39/40/41 | ||
MQTT、TCP/IP、HTTP | ||
LoRa frequency | 470Mhz-510Mhz |
LoRa Automatic Solar Smart Drip Irrigation System
As much as 50% of this water is wasted due to overwatering caused by inefficiencies in traditional irrigation methods and systems. Smart irrigation technology is the answer.
QOTO IoT Smart irrigation systems tailor watering schedules and run times automatically to meet specific landscape needs. These controllers significantly improve outdoor water use efficiencies.
Unlike traditional irrigation controllers that operate on a preset programmed schedule and timers, smart irrigation controllers monitor weather, soil conditions, evaporation and plant water use to automatically adjust the watering schedule to actual conditions of the site.
The electric valve base remote irrigation system can be applied in residential, commercial, agricultural irrigation. Using 4G GSM remote control or Lora local internet makes irrigation a more science and intelligent program to save more water and labor.
product model | QT-02-L | |
battery | 18650 lithium battery(wide temperature)， battery capacity: 2000mAh，four pcs | |
solar panel | polysilicon 6V 5.5W | |
botton connector port | solar power charging port can support 5V 1A USB charger（6.5V/2A max） | |
flow meter | external flow meter | |
max speed：10m/s | ||
min speed：0.3m/s | ||
working pressure：5kg/cm^2 | ||
ball valve torque | 60 N.m | |
Max power | communication：3.8W | |
block：25W | ||
low power mode | sleep current：<10uA | |
non low power mode | stand-by current：NB<48mA,4G<65mA,lora<26mA | |
wireless communication specification | LoRa | 470Mhz-510Mhz |
| model | QT-LW-01 |
Product | LoRa gateway | |
Power supply | DC12V 1A or DC24V 1A | |
USB connector | USB hardware update and data printing connector | |
RS485 | VCC: Pull the switch to select the sensor power supply voltage: VIN or DC5V maximum 500mA | |
A：RS485communication port A (+) | ||
B：RS485communication port B (-) | ||
GND：ground wire for sensor | ||
Connected devices | ≤50 | |
Communication distance | ＜1km | |
Protection level | IP55 或 IP67(different protection shell) | |
Working temperature | -10~60℃ | |
Max power | 3.8W (the maximum power at the moment of full power transmission) | |
Real time communication consumption | <10mA | |
4G Communication | LTE Cat-1 | |
LTE-FDD: B1/B3/B5/B8 | ||
LTE-TDD: B34/38/39/40/41 | ||
MQTT、TCP/IP、HTTP | ||
LoRa frequency | 470Mhz-510Mhz |
